Description
🔗 Precision Fitting for Micro-irrigation Lines
The 90° Elbow meets the needs of operators and individuals involved in connecting, branching, reducing, and shutting off pipes in irrigation systems. This product, from Irritec, is presented with useful data to compare its function, measurements, and operating conditions, without resorting to unforeseen adaptations.
For the 90° Elbow, the stated configurations include: 1/2x 1/2; 3/4x 3/4; 1x 1. Identifying the correct version before purchase allows for an evaluation of its bulk, capacity, and compatibility with the equipment or intended environment.
✅ Specific Benefits in Use
The stated characteristics allow for work to be planned with greater awareness. In the case of the 90° Elbow, the main benefit is that it allows for the construction or modification of the circuit with a connection consistent with the required measurements and function.
- Targeted efficiency: creation of targeted bends and branches.
- Technical control: verifiable seal after assembly.
- Operational practicality: accessible maintenance of connection points.
- Informed choice: modular configuration of the irrigation network.
With the 90° Elbow, the quality of the result and durability depend on accurate installation, area conditions, and adherence to stated limits.
🧱 Materials, Structure, and Construction
Perceived quality also depends on the consistency between material and function. For the 90° Elbow, the identifiable materials are plastic. The body, nuts, rings, and sealing surfaces must withstand the intended pressure and maintain their geometry and tightness during operation.
The technical information available for the 90° Elbow specifies: Male/female. Made of polypropylene. Before use, check surfaces, fasteners, edges, and functional parts, avoiding modifications that could alter strength or compatibility.
⚙️ Technical Data and Operational Function
Technical differences between versions directly affect the field of application. For the 90° Elbow, the diameter, thread, connection type, nominal pressure, and fitting geometry must match the pipes and components of the system. Variants must be compared considering the characteristics of the machine, the nature of the material to be treated, and the required performance level.
The function of the 90° Elbow is geared towards connecting, branching, reducing, and shutting off pipes in irrigation systems. The described configuration includes 1/2x 1/2; 3/4x 3/4; 1x 1; the manufacturer's manual remains the reference for limits, assembly, adjustments, and necessary protective devices.
🔧 Preparation and Mode of Use
Each use requires assembly, adjustment, and preliminary testing. When using the 90° Elbow, use protective devices consistent with the activity and prevent unauthorized persons or animals from accessing the operating area.
- Measure pipe and thread before assembly.
- Cut the pipe perpendicularly and clean the end.
- Insert each element in the intended sequence.
- Tighten evenly without damaging threads or nuts.
- Pressurize gradually and check each joint.
A progressive test allows for the identification of any anomalies of the 90° Elbow before continuous use.
🧼 Cleaning, Storage, and Maintenance
For the 90° Elbow, regular cleaning and checks prevent small residues from causing wear. Inspect nuts, threads, and gaskets, remove dirt and residues from the seats, and protect disassembled fittings from impacts, frost, and contamination.
To store the 90° Elbow, avoid aggressive solvents, dry every surface, and replace worn parts before reuse.
🏡 Professional Application Areas
For the 90° Elbow, the main application includes connection, branching, reduction, bending, shutting off, and water distribution in systems for vegetable gardens, gardens, greenhouses, and crops. The specific technical reference is: Male/female. Made of polypropylene. It can be found in the equipment of demanding private users, green space maintainers, and professional operators when characteristics and working conditions are compatible.
Before using the 90° Elbow in a new situation, compare materials, stresses, and limits with the technical documentation.
🎯 How to Identify the Correct Version
A professional selection considers specifications, environment, and work intensity together. For the 90° Elbow, determine the external diameter of the pipe, the size and type of thread, nominal pressure, male or female configuration, and the direction of the line. A similar measurement does not guarantee a correct seal.
Do not rely solely on similarity: the 90° Elbow must correspond to the model, measurements, and function reported by the manufacturer.
WHY CHOOSE IT?
It is suitable for an informed purchase because the 90° Elbow allows for the construction or modification of the circuit with a connection consistent with the required measurements and function. The description highlights the parameters that help understand where it can offer a concrete advantage.
The 90° Elbow is dedicated to those seeking functionality, control, and technical consistency in a carefully selected solution.