Description
🔗 Precise Connection For Micro-Irrigation Lines
90° Male Threaded Fitting M meets the needs of operators and private users involved in connecting, branching, reducing, and closing pipes in irrigation systems. The product belongs to Irritec and is presented with useful data to compare function, measurements, and operating conditions, without resorting to unforeseen adaptations.
For 90° Male Threaded Fitting M, the declared configurations include: M 16 x 1/2; M 20 x 1/2; M 20 x 3/4; M 25 x 3/4; M 32 x 1. Identifying the correct version before purchase allows for assessing bulk, capacity, and compatibility with the equipment or intended environment.
✅ Specific Benefits in Use
Correct configuration supports operational continuity and quality of results. In the case of the 90° Male Threaded Fitting M, the main benefit is that it allows for building or modifying the circuit with a connection consistent with the required measurements and function.
- Targeted efficiency: creation of specific bends and branches.
- Technical control: verifiable seal after assembly.
- Operational practicality: accessible maintenance of connection points.
- Informed choice: modular configuration of the irrigation network.
To use 90° Male Threaded Fitting M responsibly, it is necessary to respect its intended use, technical limits, and foreseen operating conditions.
🧱 Materials, Structure, and Construction
Perceived quality also depends on the consistency between material and function. For 90° Male Threaded Fitting M, the detectable materials are those declared in the manufacturer's technical data sheet. Body, nuts, rings, and sealing surfaces must withstand the expected pressure and maintain geometry and tightening during operation.
The technical information available for 90° Male Threaded Fitting M specifies: Hose barb for PE pipes. Before use, check surfaces, fasteners, edges, and functional parts, avoiding modifications that could alter resistance or compatibility.
⚙️ Technical Data and Operational Function
Measurements and functional characteristics are not secondary details, but selection criteria. For 90° Male Threaded Fitting M, diameter, thread, connection type, nominal pressure, and fitting geometry must correspond to the pipes and components of the system. The variants must be compared considering the characteristics of the machine, the nature of the material to be treated, and the required performance level.
The function of 90° Male Threaded Fitting M is geared towards connecting, branching, reducing, and closing pipes in irrigation systems. The described configuration includes M 16 x 1/2; M 20 x 1/2; M 20 x 3/4; M 25 x 3/4; M 32 x 1; the manufacturer's manual remains the reference for limits, assembly, adjustments, and necessary protective devices.
🔧 Preparation and Mode of Use
Adherence to the operating sequence is essential for controlled work. When using 90° Male Threaded Fitting M, use protective devices consistent with the activity and prevent access to the operating area by uninvolved persons or animals.
- Measure pipe and thread before assembly.
- Cut the pipe perpendicularly and clean the end.
- Insert each element in the foreseen sequence.
- Tighten evenly without damaging threads or nuts.
- Pressurize gradually and check each joint.
During the use of 90° Male Threaded Fitting M, check stability, noise, and quality of the result; any anomaly requires immediate shutdown.
🧼 Cleaning, Storage, and Maintenance
For 90° Male Threaded Fitting M, regular cleaning and checks prevent small residues from causing wear. Inspect nuts, threads, and gaskets, remove dirt and residues from the seats, and protect disassembled fittings from impacts, frost, and contamination.
To store 90° Male Threaded Fitting M, avoid aggressive solvents, dry every surface, and replace worn parts before reuse.
🏡 Professional Application Areas
For 90° Male Threaded Fitting M, the main application includes connecting, branching, reducing, bending, closing, and distributing water in systems for vegetable gardens, gardens, greenhouses, and crops. The specific technical reference is: Hose barb for PE pipes. It can be included in the equipment of demanding private users, green space maintainers, and professional operators when characteristics and working conditions are compatible.
Actual conditions may modify the performance of 90° Male Threaded Fitting M; consult the instructions before changing environment or function.
🎯 How to Identify the Correct Version
The choice should prioritize compatibility and results, not just size or appearance. For 90° Male Threaded Fitting M, ascertain the external diameter of the pipe, thread size and type, nominal pressure, male or female configuration, and line direction. A similar measurement does not guarantee a correct seal.
Comparing 90° Male Threaded Fitting M with the manual, connections, and actual dimensions before purchase avoids unauthorized modifications.
WHY CHOOSE IT?
It represents a concrete proposal because 90° Male Threaded Fitting M allows for building or modifying the circuit with a connection consistent with the required measurements and function. The description highlights the parameters that help understand where it can offer a tangible advantage.
90° Male Male Threaded Fitting M is dedicated to those seeking functionality, control, and technical consistency in a carefully selected solution.