Description
🔗 Precise Connector For Micro-Irrigation Lines
The 'T' Fitting Pn10 represents a technical solution for connecting, branching, reducing, and shutting off pipelines in irrigation systems. The product is offered by Irritec and is presented with data useful for comparing its function, measurements, and operating conditions, without relying on unintended adaptations.
For the 'T' Fitting Pn10, the declared configurations include: 1/2; 3/4; 1; 1 1/4; 1 1/2; 2. Identifying the correct version before purchase allows for evaluating its bulk, capacity, and compatibility with the intended equipment or environment.
✅ Specific Benefits Of Use
The declared characteristics allow for more informed work planning. In the case of the 'T' Fitting Pn10, the main benefit is its ability to build or modify the circuit with a connection consistent with the required measurements and function.
- Targeted efficiency: selection guided by diameters and threads.
- Technical control: creation of targeted bends and branches.
- Operational practicality: verifiable seal after assembly.
- Informed choice: accessible maintenance of connection points.
Precise assembly and an appropriate environment allow the 'T' Fitting Pn10 to operate without undue stress.
🧱 Materials, Structure, And Construction
The choice of materials affects resistance, maintenance, and operational behavior. For the 'T' Fitting Pn10, the discernible materials are plastic. Body, collars, rings, and sealing surfaces must withstand the expected pressure and maintain geometry and tightening during operation.
The available technical information for the 'T' Fitting Pn10 specifies: Female threaded. Made of polypropylene. For pipes. Before use, check surfaces, fasteners, edges, and functional parts, avoiding modifications that could alter resistance or compatibility.
⚙️ Technical Data And Operational Function
The correct configuration arises from comparing the declared data. For the 'T' Fitting Pn10, diameter, thread, connection type, nominal pressure, and fitting geometry must match the pipes and system components. Variants must be compared considering the machine's characteristics, the nature of the material to be treated, and the required performance level.
The function of the 'T' Fitting Pn10 is aimed at connecting, branching, reducing, and shutting off pipelines in irrigation systems. The described configuration includes 1/2; 3/4; 1; 1 1/4; 1 1/2; 2; the manufacturer's manual remains the reference for limits, assembly, adjustments, and necessary protective devices.
🔧 Preparation And Method Of Use
The correct procedure protects the product and improves the quality of the intervention. When using the 'T' Fitting Pn10, use protective equipment consistent with the activity and prevent access to the operating area by uninvolved persons or animals.
- Measure pipe and thread before assembly.
- Cut the pipe perpendicularly and clean the end.
- Insert each element in the intended sequence.
- Tighten evenly without damaging threads or collars.
- Gradually pressurize and check each joint.
During use of the 'T' Fitting Pn10, check stability, noise, and result quality; any anomaly requires immediate shutdown.
🧼 Cleaning, Storage, And Maintenance
For the 'T' Fitting Pn10, simple but consistent interventions keep the product ready for use. Inspect collars, threads, and gaskets, remove dirt and residues from the seats, and protect disassembled fittings from impacts, frost, and contamination.
Orderly storage of the 'T' Fitting Pn10 facilitates subsequent checks and prevents avoidable deformations or deterioration.
🏡 Areas Of Professional Use
For the 'T' Fitting Pn10, the primary application includes connecting, branching, reducing, curving, shutting off, and distributing water in systems for vegetable gardens, gardens, greenhouses, and crops. The specific technical reference is: Female threaded. Made of polypropylene. For pipes. It can be found in the equipment of demanding private users, green space maintainers, and professional operators when characteristics and working conditions are compatible.
Actual conditions may modify the response of the 'T' Fitting Pn10; consult the instructions before changing environment or function.
🎯 How To Identify The Correct Version
Professional selection considers specifications, environment, and work intensity together. For the 'T' Fitting Pn10, identify the external pipe diameter, thread size and type, nominal pressure, male or female configuration, and line direction. A similar measurement does not guarantee a correct seal.
Comparing the 'T' Fitting Pn10 with the manual, connections, and actual dimensions before purchase avoids unauthorized modifications.
WHY CHOOSE IT?
It offers value in daily work because the 'T' Fitting Pn10 allows for building or modifying the circuit with a connection consistent with the required measurements and function. The description highlights the parameters that help understand where it can offer a concrete advantage.
With the correct configuration, the 'T' Fitting Pn10 contributes to making the activity more orderly and proportionate to the needs.