Description
🔗 Precise Connector for Micro-irrigation Lines
The Male Threaded Fitting represents a technical solution for connecting, branching, reducing, and closing pipes in irrigation systems. This product, offered by Irritec, is presented with data useful for comparing its function, measurements, and operating conditions, without resorting to unforeseen adaptations.
For the Male Threaded Fitting, the declared configurations include: ø 16 x 1/2; ø 20 x 3/4; ø 25 x 3/4; ø 25 x 1; ø 32 x 1 1/4; ø 32 x 1. Identifying the correct version before purchase allows for evaluating bulk, capacity, and compatibility with the equipment or intended environment.
✅ Specific Benefits in Use
An adequate solution reduces adaptations and streamlines activity preparation. In the case of the Male Threaded Fitting, the main benefit is that it allows for building or modifying the circuit with a connection consistent with the required measurements and function.
- Targeted efficiency: creation of specific bends and branches.
- Technical control: verifiable seal after assembly.
- Operational practicality: accessible maintenance of joint points.
- Informed choice: modular configuration of the irrigation network.
Precise assembly and a suitable environment allow the Male Threaded Fitting to work without improper stress.
🧱 Materials, Structure, and Construction
Construction analysis helps distinguish a suitable configuration from one that is merely similar. For the Male Threaded Fitting, the detectable materials are those declared in the manufacturer's technical data sheet. Body, nuts, rings, and sealing surfaces must withstand the expected pressure and maintain their geometry and tightening during operation.
The technical information available for the Male Threaded Fitting specifies: Hose barb for PE pipes. Before use, check surfaces, fastenings, edges, and functional parts, avoiding modifications that could alter resistance or compatibility.
⚙️ Technical Data and Operational Function
Measurements and functional characteristics are not secondary details, but selection criteria. For the Male Threaded Fitting, the diameter, thread, connection type, nominal pressure, and fitting geometry must correspond to the pipes and components of the system. Variants must be compared considering the machine's characteristics, the nature of the material to be treated, and the required performance level.
The function of the Male Threaded Fitting is aimed at connecting, branching, reducing, and closing pipes in irrigation systems. The described configuration includes ø 16 x 1/2; ø 20 x 3/4; ø 25 x 3/4; ø 25 x 1; ø 32 x 1 1/4; ø 32 x 1; the manufacturer's manual remains the reference for limits, assembly, adjustments, and necessary protective devices.
🔧 Preparation and Method of Use
Before operating, it is necessary to prepare the machine, accessories, and work area. When using the Male Threaded Fitting, use protective devices consistent with the activity and prevent access to the operating area by uninvolved persons or animals.
- Measure pipe and thread before assembly.
- Cut the pipe perpendicularly and clean the end.
- Insert each element in the intended sequence.
- Tighten evenly without damaging threads or nuts.
- Pressurize gradually and check each joint.
Observe the behavior of the Male Threaded Fitting in the first few minutes and stop the machine if the result becomes irregular.
🧼 Cleaning, Storage, and Maintenance
For the Male Threaded Fitting, visual inspection should become part of the normal operating routine. Inspect nuts, threads, and gaskets, remove dirt and residues from the seats, and protect disassembled fittings from impacts, frost, and contamination.
Orderly storage of the Male Threaded Fitting facilitates subsequent inspection and prevents avoidable deformations or deterioration.
🏡 Professional Application Areas
For the Male Threaded Fitting, the main application includes connection, branching, reduction, bending, closing, and water distribution in systems for vegetable gardens, gardens, greenhouses, and crops. The specific technical reference is: Hose barb for PE pipes. It can be found in the equipment of demanding private individuals, green space maintainers, and professional operators when characteristics and working conditions are compatible.
Before using the Male Threaded Fitting in a new situation, compare materials, stresses, and limits with the technical documentation.
🎯 How to Identify the Correct Version
The correct model is identified starting from real operating conditions. For the Male Threaded Fitting, ascertain the external diameter of the pipe, the size and type of thread, nominal pressure, male or female configuration, and the direction of the line. A similar measurement does not guarantee the correct seal.
For the Male Threaded Fitting, the designation and measurements of the variant must match the target system; in case of doubt, a technical verification is required.
WHY CHOOSE IT?
It offers value in daily work because the Male Threaded Fitting allows for building or modifying the circuit with a connection consistent with the required measurements and function. The description highlights the parameters that help understand where it can offer a concrete advantage.
The Male Threaded Fitting finds value in conscious use, based on compatibility, maintenance, and accurate preparation.