Description
🔗 Precise Connection for Micro-irrigation Lines
Male Fitting is designed to make the work of connecting, branching, reducing, and sealing pipes in irrigation systems neater and more informed. The offering is from Irritec and is presented with useful data to compare function, measurements, and operating conditions, without resorting to unforeseen adaptations.
For Male Fitting, the declared configurations include: Ø 16 x 1/2 - PN 12.5; Ø 20 x 1/2 - PN 12.5; Ø 25 x 3/4 - PN 12.5; Ø 32 x 1 - PN 12.5; Ø 40 x 11/4 - PN 10. Identifying the correct version before purchase allows for assessing bulk, capacity, and compatibility with the equipment or intended environment.
✅ Specific Benefits of Use
An adequate solution reduces adaptations and streamlines activity preparation. For the Male Fitting, the main benefit is that it allows for constructing or modifying the circuit with a connection consistent with required measurements and function.
- Targeted efficiency: choice guided by diameters and threads.
- Technical control: creation of targeted curves and branches.
- Operational practicality: verifiable seal after assembly.
- Informed choice: accessible maintenance of connection points.
Precise assembly and a suitable environment allow the Male Fitting to work without undue stress.
🧱 Materials, Structure, and Construction
Structure and composition must be considered in relation to anticipated stresses. For Male Fitting, the identifiable materials are plastic. Body, nuts, rings, and sealing surfaces must withstand the expected pressure and maintain geometry and tightening during operation.
The technical information available for Male Fitting specifies: Made of polypropylene. Compression type, compliant with current regulations UNI-7990:2004, UNI-EN 12201-2:2004, DIN 8074:1999 and standards for the conveyance of drinking water and pressurized fluids. Particularly suitable for irrigation and gardening systems. Before use, check surfaces, fastenings, edges, and functional parts, avoiding modifications that could alter resistance or compatibility.
⚙️ Technical Data and Operational Function
Before selection, it is necessary to start with the parameters that determine compatibility and performance. For Male Fitting, the diameter, threading, connection type, nominal pressure, and geometry of the fitting must match the pipes and system components. The variants must be compared considering the characteristics of the machine, the nature of the material to be treated, and the required performance level.
The function of Male Fitting is aimed at connecting, branching, reducing, and sealing pipes in irrigation systems. The described configuration includes Ø 16 x 1/2 - PN 12.5; Ø 20 x 1/2 - PN 12.5; Ø 25 x 3/4 - PN 12.5; Ø 32 x 1 - PN 12.5; Ø 40 x 11/4 - PN 10; the manufacturer's manual remains the reference for limits, assembly, adjustments, and necessary protective devices.
🔧 Preparation and Use
Careful preparation makes work smoother and reduces unforeseen events. When using Male Fitting, use protective devices consistent with the activity and prevent access to the operating area by uninvolved persons or animals.
- Measure pipe and thread before assembly.
- Cut the pipe perpendicularly and clean the end.
- Insert each element in the intended sequence.
- Tighten evenly without damaging threads or nuts.
- Pressurize gradually and check each joint.
Male Fitting must work without unusual vibrations, loosening, or sudden variations: in these cases, stop the activity.
🧼 Cleaning, Storage, and Maintenance
For Male Fitting, simple but constant interventions keep the product ready for use. Inspect nuts, threads, and gaskets, remove dirt and residues from the seats, and protect disassembled fittings from impacts, frost, and contamination.
Male Fitting should be stored clean and dry, away from impacts, heat, and humidity that could alter its materials.
🏡 Professional Application Areas
For Male Fitting, the main application includes connection, branching, reduction, bending, sealing, and water distribution in systems for vegetable gardens, gardens, greenhouses, and crops. The specific technical reference is: Made of polypropylene. Compression type, compliant with current regulations UNI-7990:2004, UNI-EN 12201-2:2004, DIN 8074:1999 and can be found in the equipment of demanding private individuals, green space maintainers, and professional operators when characteristics and working conditions are compatible.
Real conditions can modify the response of the Male Fitting; consult the instructions before changing the environment or function.
🎯 How to Identify the Correct Version
Comparing alternatives helps avoid oversized or unsuitable purchases. For Male Fitting, identify the external pipe diameter, thread size and type, nominal pressure, male or female configuration, and line direction. A similar measurement does not guarantee a correct seal.
Before assembling the Male Fitting, check all technical references and seek qualified assistance in case of uncertainty.
WHY CHOOSE IT?
It deserves attention because Male Fitting allows for constructing or modifying the circuit with a connection consistent with required measurements and function. The description highlights the parameters that help understand where it can offer a concrete advantage.
Those who choose Male Fitting can rely on clear parameters to organize work and evaluate the expected result.