Description
🔗 Precise Connection For Micro-Irrigation Lines
Quick-Connect Tank Fitting combines verifiable features and targeted use for connecting, intercepting, and adapting compatible tanks and water lines. This product from Bucchi is presented with data useful for comparing function, measurements, and operating conditions, without requiring unforeseen adaptations.
For the Quick-Connect Tank Fitting, the declared configurations include: 3/4 M thread - Ø 35 mm connection; 1 M thread - Ø 43 mm connection; 1 1/2 M thread - Ø 59 mm connection; 2 M thread - Ø 70 mm connection. Identifying the correct version before purchasing allows for evaluating size, capacity, and compatibility with the equipment or intended environment.
✅ Specific Benefits Of Use
The correct configuration supports operational continuity and quality of results. In the case of the Quick-Connect Tank Fitting, the main benefit is that it allows for constructing or modifying the circuit with a connection consistent with the required measurements and function.
- Targeted efficiency: modular configuration of the irrigation network.
- Technical control: orderly connection between compatible pipes.
- Operational practicality: choice guided by diameters and threads.
- Informed choice: creation of targeted bends and branches.
To use the Quick-Connect Tank Fitting responsibly, it is necessary to respect its intended purpose, technical limits, and foreseen operating conditions.
🧱 Materials, Structure, And Construction
The choice of materials affects resistance, maintenance, and operational behavior. For the Quick-Connect Tank Fitting, the identifiable materials are plastic. Body, collars, rings, and sealing surfaces must withstand the foreseen pressure and maintain geometry and tightness during operation.
The available technical information for the Quick-Connect Tank Fitting specifies: Made of reinforced polypropylene. Highly ergonomic, it ensures optimal direct installation from the outside. Gasket design guarantees hydraulic seal at 4 bar, on a flat wall or with a minimum radius of 50 cm, even with applied stresses of 8Nm. Before use, check surfaces, fastenings, edges, and functional parts, avoiding modifications that could alter resistance or compatibility.
⚙️ Technical Data And Operational Function
Before making a choice, it is necessary to start with the parameters that determine compatibility and performance. For the Quick-Connect Tank Fitting, the diameter, thread, connection type, nominal pressure, and geometry of the fitting must match the pipes and components of the system. The variants must be compared considering the characteristics of the machine, the nature of the material to be treated, and the required performance level.
The function of the Quick-Connect Tank Fitting is oriented towards connecting, intercepting, and adapting compatible tanks and water lines. The described configuration includes 3/4 M thread - Ø 35 mm connection; 1 M thread - Ø 43 mm connection; 1 1/2 M thread - Ø 59 mm connection; 2 M thread - Ø 70 mm connection; the manufacturer's manual remains the reference for limits, assembly, adjustments, and necessary protective devices.
🔧 Preparation And Usage Instructions
Use must begin with a complete check of the area and the product. When using the Quick-Connect Tank Fitting, use protective devices consistent with the activity and prevent access to the operating area by uninvolved persons or animals.
- Measure pipe and thread before assembly.
- Cut the pipe perpendicularly and clean the end.
- Insert each element in the foreseen sequence.
- Tighten evenly without damaging threads or collars.
- Pressurize gradually and check each joint.
During use of the Quick-Connect Tank Fitting, check stability, noise, and quality of the result; any anomaly requires immediate shutdown.
🧼 Cleaning, Storage, And Maintenance
For the Quick-Connect Tank Fitting, cleaning and periodic checks prevent small residues from causing wear. Inspect collars, threads, and gaskets, remove dirt and residues from the seats, and protect disassembled fittings from impacts, frost, and contamination.
Maintenance of the Quick-Connect Tank Fitting does not require improvised interventions: use only compatible methods and products.
🏡 Professional Application Areas
For the Quick-Connect Tank Fitting, the main purpose includes connection, branching, reduction, bending, closing, and water distribution in systems for vegetable gardens, gardens, greenhouses, and crops. The specific technical reference is: Made of reinforced polypropylene. Highly ergonomic, it ensures optimal direct installation from the outside. It can be included in the equipment of demanding private individuals, green space maintainers, and professional operators when characteristics and working conditions are compatible.
Before using the Quick-Connect Tank Fitting in a new situation, compare materials, stresses, and limits with the technical documentation.
🎯 How To Identify The Correct Version
The correct model is identified starting from real operating conditions. For the Quick-Connect Tank Fitting, determine the external diameter of the pipe, the size and type of thread, nominal pressure, male or female configuration, and the direction of the line. A similar measurement does not guarantee the correct seal.
For the Quick-Connect Tank Fitting, the designation and measurements of the variant must match the destination system; in case of doubt, a technical verification is required.
WHY CHOOSE IT?
It offers value in daily work because the Quick-Connect Tank Fitting allows for constructing or modifying the circuit with a connection consistent with the required measurements and function. The description highlights the parameters that help understand where it can offer a concrete advantage.
With the correct configuration, the Quick-Connect Tank Fitting helps make the activity more orderly and proportionate to the needs.